There’s nothing more frustrating than suffering from computer boot issues. If you are using a Toshiba laptop, you are also likely to encounter the same issues such as Laptop stuck on Toshiba Leading Innovation screen. In this article on MiniTool Website, we will guide you through how to address this annoying issue step by step. Without delay, let’s cut to the chase.

Toshiba Laptop Stuck on Startup Screen

Toshiba laptops are one the best-selling laptops on the market because of their reliability and lightweight, great design, powerful processors, and excellent battery life. Whether you are a businessman, game player, or student, Toshiba laptops can satisfy your needs.

However, no matter which computer brand you are using, it is pretty common to be plagued by some system issues like black screen, blue screen of death, stuck on boot screen, and more. If Toshiba laptop stuck on startup screen bothers you suddenly, how can you get over it? In this guide, we will present you with some effective troubleshooting tips.

Ultimate Guide to Troubleshoot Toshiba Satellite Laptop Problems
Ultimate Guide to Troubleshoot Toshiba Satellite Laptop Problems

Keep calm when encountering various Toshiba Satellite laptop problems. Here shows you how to tackle different errors in detail.

Read More

How to Fix Toshiba Laptop Stuck on Startup Screen on Windows 10/11?

Fix 1: Boot Your PC without Peripherals

Before taking any further action, let’s start with a simple solution – restarting your computer without peripherals. These external devices might conflict with your system and result in errors like Toshiba laptop stuck on Toshiba screen. Follow these steps:

Step 1. Press and hold the Power button until your Toshiba laptop powers off.

Step 2. Disconnect all the peripherals including printers, scanners, webcams, SD card readers, USB flash drives, and so on.

Step 3. Start your computer again.

Fix 2: Boot Toshiba Laptop in Safe Mode

Safe Mode is an inbuilt diagnostic mode in Windows 10/11 and it only allows starting up basic system programs and services during the booting process. In this mode, you can solve computer problems like virus infection, hardware conflicts, outdated hardware drivers, and more. Here’s how to enable Safe Mode on your Toshiba laptop:

Step 1. Power off your computer and then restart it. When you see the Windows logo, press the Power button. Repeat this process three or more times until the Automatic Repair screen and then click on Advanced options to enter Windows Recovery Environment.

Step 2. Go to Troubleshoot > Advanced options > Startup Settings > Restart.

Step 3. After your Toshiba laptop restarts, press F4, F5, or F6 to enable Safe Mode as per your needs.

enable Safe Mode
To start your Windows 10 in Safe Mode, there are multiple ways. See this guide - How to Start Windows 10 in Safe Mode (While Booting).

Fix 3: Check the RAM

Chances are that there are some problems with the RAM on your computer. A bad computer memory or memory slot can also cause Toshiba laptop stuck on loading screen. If this is the case, you will have to reinstall or change the computer memory. To check RAM, you need to:

Step 1. Power off your computer.

Step 2. Open the computer case.

Step 3. On the motherboard, remove RAMs from the memory slots.

Step 4. Put the RAMs back one by one while trying to boot each one. If your computer can boot normally without one or more of the RAMs, these RAMs might be the culprit. Also, you need to remove the modules and place them in different slots to check if some slots are faulty.

How to Check RAM on Windows 11/10 (Size, Speed, Type, etc.)
How to Check RAM on Windows 11/10 (Size, Speed, Type, etc.)

How to check RAM on Windows 11? It is an easy task and you can follow ways in this post to check RAM speed, size, type, and more.

Read More

Fix 4: Reset BIOS to Default

When you are booting up your Toshiba laptop, the BIOS settings will instruct it on how to boot up the operating system. Once the BIOS settings are set improperly, it will lead to computer boot issues like Toshiba laptop stuck on the logo screen. To solve such boot issues, consider resetting the BIOS to its default settings. To do so:

Step 1. Boot your Toshiba laptop into Windows Recovery Environment.

Step 2. Go to Troubleshoot > Advanced options > UEFI Firmware Settings > Restart to enter the BIOS menu.

Step 3.  Use the arrow keys to locate the Load Setup Defaults option > select Yes > hit Enter.

reset BIOS

Step 4. Press F10 to save the changes and exit the BIOS menu.

Fix 5: Clear CMOS

Clearing CMOS is another way to reset your BIOS settings to their factory defaults. If you have made any changes to BIOS before Toshiba laptop stuck on startup screen, follow these guidelines:

Step 1. Turn off your laptop, remove all peripherals connected to your device, and then disconnect the power connection.

Step 2. Remove the computer cover, find the battery on the board and then remove it.

Step 3. Wait for several minutes and then reconnect the battery to the computer.

Step 4. Reconnect the peripherals and reboot your computer.

How Long Does a CMOS Battery Last and How to Prolong Lifespan
How Long Does a CMOS Battery Last and How to Prolong Lifespan

How long do CMOS batteries last? If you are curious about it, find the answer in this post. You can even get tips to improve battery lifespan.

Read More

Fix 6: Perform Startup Repair

When your computer is unable to boot normally, you can utilize the Windows inbuilt tool called Startup Repair. This tool is designed to deal with some system problems by automatically scanning system files, registry settings, configuration settings and more. Here’s the detailed tutorial:

Step 1. Power off your Toshiba laptop > press the Power button to reboot it > hit the Power button when the Windows logo appears on the screen. Repeat the processes several times until prompted by the Automatic Repair screen.

hit Advanced options

Step 2. Click on Advanced options to enter Windows Recovery Environment.

Step 3. Then, go to Troubleshoot > Advanced options > Startup Repair to automatically start diagnosing and handling Toshiba laptop stuck on boot screen for you.

Fix 7: Factory Reset Toshiba Laptop

If everything fails, the last resort is to factory reset your Toshiba laptop. By doing so, you can speed up a slow computer, prolong computer longevity, as well as getting rid of some severe system issues. Here’s how to perform a factory reset of your Toshiba laptop:

To avoid accidental data loss, you had better create a backup of your important files before resetting. MiniTool ShadowMaker is one of the best backup software that can help you to easily create backups on Windows 11/10/8/7.

MiniTool ShadowMaker TrialClick to Download100%Clean & Safe

Step 1. Shut down your Toshiba laptop and remove all the unnecessary external peripherals. Make sure your computer is connected to a power source to avoid any power outage.

Step 2. Press and hold the 0 key on the keyboard and at the same time press the Power button to start your laptop. When you hear the beeping, release the 0 key.

Step 3. Select Yes when prompted by the warning message to continue the system recovery.

Step 4. Choose the operating system > hit Yes > tick Recovery of Factory Default Software > hit Next to continue.

Recovery of Factory Default Software

Step 5. Tick Recover to out-of-state (System Recovery Options are included) and hit Next to start the process. This process might take quite a while, so please wait patiently.

What to do if Toshiba factory reset 0 key is not working? See this guide - Toshiba Factory Reset 0 Not Working? See What to Do to get more solutions now.

Help! I had trouble booting my Toshiba laptop and it even got stuck on the boot screen a few moments ago. Thanks to the solutions in this guide, I managed to fix it on my own! Give a glimpse if you have the same issue!Click to Tweet

Suggestion: Back up Your Toshiba Laptop with MiniTool ShadowMaker

By now, your Toshiba laptop can boot normally. As stated in the beginning part, computer boot or system issues are not rare. In consequence, why don’t you take some preventive measures before similar problems occur again?

Here, we recommend you create a backup of your PC in advance so that you can directly use the system image to restore your system to the normal state with ease rather than wasting much time troubleshooting the problematic Windows machine.  

How to back up your PC? It will not be a rocket science if you try using a reliable Windows backup software called MiniTool ShadowMaker. This powerful tool is designed to backup files, folders, Windows systems, disks, and partitions with easy steps. Besides, MiniTool ShadowMaker also allows cloning HDD to SSD to improve the performance of your Windows machine.

Here’s how to backup computer with this tool:

Step 1. Download this useful tool and you can enjoy most services for free within 30 days.

MiniTool ShadowMaker TrialClick to Download100%Clean & Safe

Step 2. Launch it and then go to the Backup page.

Step 3. In this page, you can see the system is selected by default in the SOURCE section, so you just need to go to the DESTINATION section to select an external hard drive or USB flash drive to store the system image.

the Backup page

Step 4. Either click on Back Up Now to start the process immediately or hit Back Up Later to delay the task. The delayed task will remain in the Manage page.

Step 5. After a system image is made, you will need to go to Tools > Media Builder > WinPE-based media with MiniTool plug-in > select a medium to create a bootable USB drive or hard drive. When your system fails to boot or crashes in the future, you can boot it from this drive and perform system recovery with MiniTool ShadowMaker.

hit WinPE-based media with MiniTool plug-in
3 Ways to Create Automatic File Backup in Windows 10/11 Easily
3 Ways to Create Automatic File Backup in Windows 10/11 Easily

Want to create automatic file backups in Windows 10/11? This post shows you how to automatically back up files to an external hard drive with ease.

Read More

We Need Your Voice

This brings you to the end of our guide on fixing Toshiba laptop stuck on startup screen on Windows 10/11. We have tried walking you through all the steps in detail and sincerely hope that one of the solutions above can do the trick for you. Moreover, it is also necessary to create a backup of your system and important data with MiniTool ShadowMaker in daily use of your computer.

For more confusion about our products, please feel free to contact us via [email protected]. Any suggestion will be appreciated.

Toshiba Laptop Stuck on Startup Screen FAQ

Why is my laptop getting stuck on startup screen?
When your laptop is getting stuck on the startup screen, the most common causes might be:
·         Incompatible software
·         Driver failure
·         Interference of external peripherals
·         Recent Windows update failure
·         Misconfigured BIOS settings
·         Virus or malware attacks
How do I fix my Toshiba laptop that won’t boot up?
Fix 1: Check Power Supply & Battery
Fix 2: Disconnect All External Devices
Fix 3: Test the Monitor
Fix 4: Enable Safe Mode
Fix 5: Perform Startup Repair
Fix 6: Reset Your Computer
How do I manually reboot my Toshiba laptop?
·         When your Toshiba laptop is bootable – click on the Start icon > the Power icon > select Restart.
·         When some applications freeze – press Ctrl + Alt + Del > click on the Power icon in the lower right corner > hit Restart.
·         When Ctrl + Alt + Del are not working – press the Power button to power off your computer > press the Power button again after some moments.
  • linkedin
  • reddit