If you are still running Windows Vista, you should upgrade to Windows 10 since Vista is outdated now. In this post from MiniTool Solution, you can see a full guide on the Windows Vista upgrade. Also, some things that should be done after the update are described here.

It Is Necessary to Upgrade Vista to Windows 10

Windows Vista, a Windows operating system, was released all over the world on January 30, 2007. Since the release of Vista, Microsoft has issued a series of other versions of Windows that have better features than Vista. Now, the latest operating system is Windows 10.

Due to some reasons, Microsoft ended the mainstream support for Vista on April 10, 2012, and stopped the extended support on April 11, 2017. This means Microsoft won’t provide any kind of support and your machine no longer receives any more maintenance like security and performance updates.

To be specific, your computer is vulnerable to viruses, malware, and other security risks and prone to error. To avoid viruses or malware attacks, the best course of action is to switch to a newer version of Windows like Windows 10.

But can Vista be upgraded to Windows 10? The answer is yes. Get the guide from the following parts.

How to Upgrade Vista to Windows 10

Microsoft doesn’t provide a direct path to upgrade from Vista to Windows 10 but you can finish the update by following the full guide below.

Step 1: Before You Begin

You may ask: can I update Vista to Windows 10 for free? Sorry, the answer is no. Although many of you keep looking for how to upgrade Windows Vista to Windows 10 for free, the result is the same – you have to purchase a license key of Windows 10.

Now, there are two options for you to choose: buy a new PC that comes with Windows 10 or install Windows 10 from scratch on the current machine. Apparently, the second choice is cheaper and you mostly choose this one.

On the other hand, you should check if your computer meets the Windows 10 system requirements before the update. Now, let’s see the minimum hardware requirements to install Windows 10 from the Microsoft website:

  • Processor: 1 gigahertz (GHz) or faster processor or SoC
  • Memory: 1GB for 32-bit OS or 2GB for 64-bit OS
  • Storage: 16GB for 32-bit OS 20GB for 64-bit OS
  • Graphics card: DirectX 9 or later with WDDM 1.0 driver
  • Display: 800 x 600

This means your computer must either have them or have features better than the ones listed above. If you meet these requirements, go to Microsoft Store to buy a key of Windows 10 Home or Pro.

How to Upgrade Windows 10 Home to Pro without Losing Data Easily
How to Upgrade Windows 10 Home to Pro without Losing Data Easily

Want to upgrade Windows 1- Home to Pro to enjoy more features? Here two simple methods for Windows 10 Pro upgrade are offered to you.

Read More

Step 2: Create a Full Backup for Important Files on Windows Vista

Backing up your important files in Vista is very important since the Windows upgrade from Vista requires a clean install. This means your disk data and programs will be erased during the installation process.

Thus, before you upgrade Vista to Windows 10, you should make a backup of your critical files to an external hard drive or USB drive and make sure you have the installation files and product key to reinstall any software after the update.

How can you create a full backup for your disk data in Vista?

Windows Built-in Backup Tool

In Windows Vista, the built-in backup tool can be used to back up your files. Just go to Control Panel from the Start button, then click Back up your computer under the System and Maintenance section to go to Backup and Restore Center. Then, you can click Back up files to begin.

However, this backup tool in Vista is not excellent since it doesn’t allow you to choose singles files to back up but helps you create a backup for the entire partition. Additionally, system drives are included in the backup by default. You aim at the upgrade from Windows Vista to Windows 10, so it is not essential to back up the system.

To back up your important files with better user experience, you should try a flexible and reliable backup tool.

MiniTool ShadowMaker

MiniTool ShadowMaker is such a backup software. It is professional, reliable, safe and also free. It is designed to back up the Windows operating system (including Windows Vista/XP/7/8/10), files, folders, disks and partitions. Automatic backup, incremental and differential backup can be realized if you use this backup program.

3 Ways to Create Automatic File Backup in Windows 10/11 Easily
3 Ways to Create Automatic File Backup in Windows 10/11 Easily

Want to create automatic file backups in Windows 10/11? This post shows you how to automatically back up files to an external hard drive with ease.

Read More

In addition to image backup, you can use it to sync files & folders to other locations easily. Also, disk cloning is supported.

Now, you can try downloading MiniTool ShadowMaker from the following button to make a backup for the important files before you upgrade Vista to Windows 10. Note that the trial edition only lets you use for free in 30 days.

MiniTool ShadowMaker TrialClick to Download100%Clean & Safe

Now, you get this backup tool in Vista. Just try it to back up your data.

1. Launch MiniTool ShadowMaker Trial Edition on the Vista computer.

2. On the Backup page, MiniTool ShadowMaker chooses system partitions as the backup source by default. Just click the Source section and go to choose files that you want to back up.

choose files to back up

Tip: In your case, the files that need to be backed up may be more. You can drag them to a folder in Windows Explorer and then choose that folder to back up. Of course, you can choose each file one by one and then start the backup.

3. Choose a path for the backup files in the Destination section. An external hard drive or USB flash drive is recommendable here.

choose an external drive for backup

4. After finishing all the selections, go back to the Backup page and click Back up Now to start the backup operation at once.

MiniTool ShadowMaker backs up files in Vista

Tip: In addition to using the Backup feature of MiniTool ShadowMaker, you can try using the Sync feature to sync your important files to an external hard drive or USB flash drive for file backup. This post – How to Sync Folders to External Drive shows you the detailed steps.

“I needed to upgrade Vista to Windows 10. Thanks to MiniTool ShadowMaker, I backed up my files easily before Windows Vista upgrade.”Click to tweet

After finishing PC backup, now you can continue the upgrade from Windows Vista to Windows 10.

Step 3: Perform a Clean Install for Windows Vista Upgrade

As mentioned above, you can only upgrade to Windows 10 from Vista by doing a clean install.

Create a Windows 10 Bootable USB Flash Drive

Before you do, please prepare a USB flash drive with at least 8GB of storage so that you can use it to create a bootable USB drive. The USB drive will be erased during the bootable drive creation process, thus, make sure no important data is saved in it.

Since Windows Vista is too old, many tools cannot be used on Vista, for example, Media Creation Tool. Once you open this tool, you will receive the error “MediaCreationTool.exe is not a valid Win32 application”. To create the bootable drive successfully, you have to use this tool on another computer running Windows 7/8.1/10.

Tip: If you want to create a bootable USB drive on another computer, this post – How to Create Bootable USB from ISO Windows 10 for Clean Install may be what you need.

If you still want to create the Windows 10 bootable drive in Vista, please download a Windows 10 iso from the website and use a free iso burning tool like UNetbootin to burn the iso file to your USB flash drive. Just choose the iso file and your USB drive to start burning.

use UNetbootin to burn iso to a USB drive in vista

How to Free Download Windows 10 Pro ISO and Install It on a PC?
How to Free Download Windows 10 Pro ISO and Install It on a PC?

How to free download Windows 10 Pro ISO and use this file to install the operating system on your PC? Read this post to know what you should do.

Read More

Clean Install

Now, it is time to install Windows 10 on your machine that is running Vista. Follow the guide below:

1. Restart your computer and then press a specific key to enter BIOS.

Tip: Depending on different computers, the key you press is also different and it can be F2, F12, F10, etc.

2. In BIOS, go to configure the PC to boot from the bootable USB flash drive.

3. Configure the language, time and currency format and keyboard.

4. In the new window, click Install now.

install Windows 10

5. Enter the product key for your copy of Windows 10 and click Next.

6. Choose the edition of Windows 10 you want to install. Note that the edition should be the one that you bought the license key for.

7. Accept the licensing agreement.

8. Choose Custom: Install Windows only (advanced) if you see the following window.

install Windows only

Tip: If you see the error message “We couldn’t find any drives. To find the storage driver, click Load driver.” after this step, perhaps this post – How To Fix We Couldn’t Find Any Drives While Installing Windows is the post you are looking for.

9. Choose partition 0 on the hard drive (usually drive 0) and click Delete to remove it.

10. Choose to install Windows 10 on the unallocated space. Click Next and then the installation process is starting.

Drive 0 unallocated space

After finishing the installation, you should follow the instructions on the screen to complete your settings. After that, you can enjoy the new features of Windows 10 on your old machine. Also, don’t forget to restore your files from backup to the new Windows system and reinstall any program you used on Windows Vista.

Now, all the operations on how to upgrade Vista to Windows 10 are described in this post. Just follow the guide to finish the Windows Vista upgrade now. If you like this post, you can also share it with more people on Twitter.

Click to tweet

Tip: Some of you may be wondering about “how to upgrade Vista to Windows 7/Windows 8” or “upgrade Windows XP to Windows 8”. Actually, you also need to back up your files before the update and prepare a Windows 7 or 8 bootable USB drive to perform a clean install.

What to Do After Installing Windows 10?

After completing the update from Windows Vista to Windows 10, there are some things you should do.

1. Go to Settings > Update & Security > Windows Update to check if there are some available security updates. If yes, install them.

check for updates in Windows 10

2. Make sure your drivers are up-to-date. Just right-click the Windows button to choose Device Manager, right-click a device and choose Update driver. Repeat the operations for any driver. Alternatively, you can get a professional driver update software from the Internet, scan the system and download and install the latest drivers.

update driver via Device Manager

How to Update Drivers in Windows 11? Try 4 Ways Here!
How to Update Drivers in Windows 11? Try 4 Ways Here!

How to update drivers in Windows 11 to fix some errors or improve PC performance? This post gives you some efficient methods for driver update.

Read More
Tip: In addition to these two things, there are some other things you should do. This post – 5 Basic Things for You – What to Do After Installing Windows 10 is what you need.
How to Create Windows 11 Installation Media on PC, Mac, or Linux
How to Create Windows 11 Installation Media on PC, Mac, or Linux

How to create Windows 11 installation media on a PC, Mac, or Linux for installing the new operating system? Follow the guide here now.

Read More

Bottom Line

Do you have a need to upgrade Vista to Windows 10? How to update Vista to Windows 10? After reading this post, you clearly know it. Also, what to do after installing Windows 10 is also told to you. Now, don’t hesitate to perform the Windows Vista update by following the guide above.

On the other hand, if you have any questions or suggestions, remember to let us know. Leaving a comment below or contacting [email protected] is for you to choose.

Upgrade Vista to Windows 10 FAQ

Can you upgrade from Vista to Windows 10 for free?
The answer is negative. You need to buy a license key of Windows 10 for the Vista upgrade.
How much does it cost to upgrade from Vista to Windows 10?
If your machine meets the minimum hardware requirements of Windows 10, you can do a clean install but you need to pay for a copy of Windows 10. The prices of Windows 10 Home and Pro (on microsoft.com) are respectively $139 and $199.99.
Is Windows Vista still supported in 2019?
No. Microsoft stopped all the support for Vista on April 11, 2017.
Can I still use Windows Vista?
Of source, your computer can still work on Windows Vista but it is not safe and vulnerable to viruses and malware since Microsoft stopped the release of security updates in 2017.
  • linkedin
  • reddit