RAM is an important component of the computer and it allows the data item to be read or written in almost the same amount of time. But, do you know how to overclock RAM? This post from MiniTool shows the step by step guide on overclocking RAM.

RAM is the abbreviation of random-access memory and it is one of the most important components of your computer. A random-access memory device allows data items to be read or written in almost the same amount of time, regardless of the physical location of the data within the memory.

Usually, RAM is used as a temporary data storage medium for the operating system or other programs that are running.

What You Need to Know Before Overclocking RAM?

Overclocking RAM is more complicated than CPU or GPU overclocking. But you can also choose to overclock RAM to get achieve faster speed.

The speed of RAM, measured in MHz, refers to its data transfer rate. The faster the data transfer rate, the better the RAM’s performance. Overclocking RAM will modify the specific parameters such as timing and voltages to allow the modules to operate at greater speeds than they might out of the box.

After knowing some basic information on RAM overclocking, it is time to proceed on.

How to Overclocking RAM?

In this part, we will show you how to overclocking RAM. When overclocking any hardware including the RAM, it is important to establish a baseline level of performance before modifying any settings. This will allow you to clearly see the results of your efforts and compare the difference to the stock performance.

Tip: Altering clock frequency or voltage may void any product warranties and reduce stability, security, performance, and life of the processor and other components.

Now, here is the tutorial.

  1. Turn off your computer and boot into BIOS or UEFI firmware setup screen.
  2. After entering the BIOS interface, find the section for memory and load your XMP profile to start with. Make sure the frequency is what you want. If you do not want to touch the timings, you can likely increase the frequency while keeping the same timings, especially on Intel platforms. Pick whichever makes sense of you and remember you can change it later.
  3. Select the profile you want to use, save and apply your settings. Then reboot your computer.

overclock RAM

Inter XMP makes it easy to overclock RAM by applying the correct settings for your modules as per the recommendation from the memory module manufacturer.

You can set the following setting modules.

  • Set the memory frequency to 3200 MHz.
  • Set Timings at 14-(14)-14-34.
  • Set the memory voltage to 1.35 V.

After applying the changes, reboot your computer and then use the software you used to get your initial benchmark score. Run it again and check whether the RAM speed has been increased.

As for how to overclock RAM ddr4 and how to overclock RAM ddr4 ryzen, you can take the above the measures, too. If you want to improve RAM speed, you can choose to overclock RAM.

Final Words

To sum up, this post has introduced what the RAM is and also shown how to overclock RAM. If you want to overclock RAM, you can take the above measures. If you have any different idea of how to overclock RAM, you can share it in the comment zone.

  • Linkedin
  • Reddit