How to Update Xbox One Controller? 3 Methods for You!

Xbox One controllers use firmware that is a special kind of software designed to run one hardware device. Although it is not required, Microsoft always makes updates to this firmware.

Firmware VS Software: What’s the Difference Between Them?

What’s the difference between firmware and software? Now, read this post and you can know much information on firmware vs software.

Read More

These firmware updates make many improvements to the controller, for example, enhancements for your Xbox One Stereo Headset Adapter capabilities. This is why you need to update Xbox One controller.

Although it is not mandatory to use an Xbox One controller, we strongly recommend installing these updates. Here are 3 different ways for the Xbox One controller update and let’s go to see them.

How to Update Xbox One Controller

Method 1: Update Xbox One Controller Wirelessly

Xbox One controllers are designed to connect to the console via a wireless connection and most of the recent controllers can receive updates wirelessly. But because of hardware limitations, only controllers purchased during or after June 2015 can be updated wirelessly.

If you are not sure when you buy the controller, check the bottom of it to see if there is a 3.5-mm port. If yes, start the update wirelessly by following these steps.

Step 1: Ensure your Xbox One is connected to the Internet.

Step 2: Press the Xbox button on the controller.

Step 3: Go to System > Settings > Kinect & devices > Devices & accessories.

Step 4: Choose 3 dots to get more options and select the Firmware version box.

Step 5: Click Update now and wait for the process finishes.

Method 2: Update Xbox One Controller with USB

If you cannot see the 3.5-mm port on the bottom of your controller, it means that the controller was purchased before June 2015. In this case, you can use a micro USB cable to connect the controller to your Xbox One for an update.

After connecting the controller to the console, instructions for automatically installing the update should appear. If the process doesn’t initiate automatically, you should perform a manual update and the operations are the same as the wireless update process.

Method 3: Update Xbox One Controller on a Windows 10 PC

You know, Xbox One controllers are designed to work with Windows 10. That is, you can connect a controller to a PC that is running Windows 10 via a USB cable or a wireless adapter for Windows. And you can update your controller on a PC.

How to update Xbox One controller on PC? These instructions are helpful for you:

Step 1: Download the Xbox Accessories app from Microsoft’s website and install it on your Windows 10 PC. Note that this app can be used in only Windows 10.

Step 2: Launch this app.

Step 3: Connect your Xbox One controller via a USB cable or a wireless adapter for Windows.

Step 4: If the controller update is required, you see the information “Update Required” and an automatic update is performed.

If you don’t see an automatic update message, click 3 dots, click Firmware version and start updating the controller.

Bottom Line

How to update Xbox One Controller? After reading this post, you know the answer. Just try one of these methods if you need the Xbox One controller update.