If you are experiencing memory card error 1010, this post is worth reading because it collects the reasons and solutions to the issue. To obtain more details, read this post of MiniTool now!

Memory cards are electronic data storage devices used for storing digital information. They are usually used in digital portable electronic devices, ranging from DSLR to Nintendo Switch. For instance, the SD and microSD variants are most commonly used in smartphones and digital cameras. You should note that different devices require different types of memory cards.

Some of the most popular forms of memory cards are listed below.

The main types of SD cards are illustrated in this post. You can read it to get an overall understanding of SD card types.
  • Secure Digital (SD) card
  • CompactFlash (CF) card
  • SmartMedia
  • Memory Stick
  • MultiMediaCard (MMC)

Memory Card Error 1010

When you use memory cards, you can receive errors like can’t delete files from SD card, SD card not accessible, CF card not recognized or reading, and memory card error 1010 discussed in this post. A lot of users are troubled by the memory card error code 1010. You can see complaints about it in many communities and forums.

A user from practicalmachinist.com told his experience and would like to seek help from the Internet. The content below is his story.

“Everything was going as normal, running DNC from a CF card on OI-MC. Reposted a program and inserted the card, switched to "remote" mode, and now, all I get is a "memory card error 1010", which I have not been able to track down in the book. I did try another card that was also working fine. Same error, so I am not leaning toward a bad card. Restarted machine, reformated card at the PC, still get the alarm. Might be easier to diagnose if I knew what the alarm was. Any help is greatly appreciated.”

If you are also confused about memory card error 1010, pay attention to this post now! It helps you work through the error code 1010 on memory card.

Possible Reasons for Memory Card Error 1010

The memory card error code 1010 can be caused by multiple factors. Some possible causes of the memory card error 1010 are summarized as follows. You can take them as a reference when you troubleshoot the error.

  • Virus or malware attack
  • Fault card reader
  • Insufficient formatting of the memory card
  • Inappropriate power failure or pulling out of the memory card without switching off the digital camera
  • Damaged or corrupted memory card due to incorrect disk structure
  • Low battery during the media file transfer process
  • Switching the digital camera when the camera is still writing files on the memory card

Based on the above causes, this post offers you some troubleshooting methods for memory card error 1010. You just need to pick one way to get rid of the confusing issue.

Method 1: Run a Virus Scan on the Memory Card

First and foremost, you should run a virus scan on your memory card after you receive the error code on memory card. This can scan and remove viruses and malware on the memory card, troubleshooting the memory card error code 1010.

According to your preference, make use of Windows Security or third-party antivirus programs to scan your memory card. Here, we show you how to scan the memory card via Windows Security.

Step 1: Plug the memory card into your computer. Then press the Windows and I keys simultaneously to open the Settings app.

Step 2: In the main interface of the Settings window, click Update & Security.

Step 3: In the next window, click Windows Security > Virus & threat protection.

click Virus and threat protection

Step 4: Tap on Scan options to continue.

tap Scan option

Step 5: Click Custom scan from the given options and then click Scan now.

choose a scan option and click Scan now

Step 6: In the pop-up window, click This PC > memory card > Select Folder.

choose the connected memory card to scan

Step 7: After that, Windows Security will scan your memory card for viruses/malware and remove them. Simply wait for the finish of the scan process.

scan the memory card

Method 2: Change a Drive Letter

Try changing the drive letter when memory card error code 1010 occurs. You can do that in Disk Management – a Windows built-in disk/partition managing utility. Here are the detailed steps for you.

Step 1: Press the Windows and X keys and then click Disk Management on the pop-up menu.

Step 2: Find and right-click on the memory card and then click the “Change Drive Letter and Paths…” option.

If Change Drive Letter and Path greyed out in Disk Management, change the memory card drive letter via the Change Letter feature of MiniTool Partition Wizard.

MiniTool Partition Wizard FreeClick to Download100%Clean & Safe

choose Change Drive Letter and Paths

Step 3: In the elevated window, click the Change option. Then select a different drive letter from the drop-down menu and click OK to save changes.

You will be warned that programs replying on the drive letter might not run correctly. If you want to continue, click Yes to move forward.
assign the new drive letter

Step 4: Now, check if the error code 1010 on memory card disappears.

Method 3: Format the Memory Card

If your memory card is not formatted completely, you can also see the memory card error code 1010. In this case, you should perform a full format on your memory card. There are several ways to format the memory card. You can choose a free SD card formatter to format the device.

Learn the difference between quick format and full format in this post.

MiniTool Partition Wizard is ideal for formatting the memory card. As a comprehensive partition manager, it enables you to complete the format process within a few clicks. It’s worth noting that it breaks the FAT32 partition size limit, which means that you can format a memory card over 32GB to FAT32.

Other tools like Disk Management, Diskpart, and File Explorer don’t allow you to format memory cards larger than 32GB to FAT32.

Besides, MiniTool Partition Wizard allows you to create and extend a FAT32 partition that exceeds 32GB, while other Windows built-in utilities can’t do. With this free partition manager, you can format SSDs, convert MBR to GPT, clone hard drives, check disk space usage, clone Windows 10 to SSD, recover data from hard drives, and make other changes to your storage devices.

Now, click the button below to download and install MiniTool Partition Wizard on your computer. Then follow the steps below to format your memory card.

MiniTool Partition Wizard FreeClick to Download100%Clean & Safe

Step 1: Launch the software to enter its main interface.

Step 2: In the disk map area, find and right-click on your memory card, and then click the Format option.

choose the Format option

Step 3: In the prompted window, configure settings like partition label, file system, and cluster size based on your demands. Then click OK to save changes you’ve made.

Step 4: Finally, click Apply to carry out the pending operation.

execute the operation

Method 4: Run CHKDSK

CHKDSK is a utility embedded in the Windows system, enabling you to scan your hard drive and other storage devices for errors. Here, you can run it to scan and fix issues with the memory card. The detailed steps are shown as follows.

Step 1: Hold the Windows and R keys to open the Run dialog window.

Step 2: Type cmd and hit Ctrl + Shift + Enter keys to run Command Prompt as administrator.

In the elevated User Account Control window, click Yes to confirm the operation.
run Command Prompt as administrator from Run window

Step 3: In the Command Prompt window, type chkdsk /f c: and hit Enter to execute the operation.

You should replace “c” with the drive letter of your memory card.
type and execute the command

Step 4: After the checking process ends, type exit and press the Enter key to close Command Prompt.

Related articles:

Method 5: Perform a System Restore

Restoring the computer to an earlier state is also an effective way to fix memory card error 1010. You can have a try! Here’s the full tutorial for you.

Step 1: Open the Run window, type control, and then click OK. This will open Control Panel for you.

Step 2: In the Control Panel window, click the Recovery option.

click Recovery

Step 3: In the next window, tap Open System Restore.

choose Open System Restore

Step 4: In the Restore system files and settings box, click Next to continue.

click Next to go on

Step 5: Choose a restore point and click Scan for affected programs. Then you will see programs that would be affected after you restore your computer to the selected point.

Step 6: If the influence is acceptable, click Close > Next > Finish to complete the operation.

What can you do to fix error code 1010 on memory card? This post lists some available fixes for the error. You can try them to get rid of the issue.Click to Tweet

Bottom Line

Up to now, this post has shown you the possible causes and 5 available troubleshooting methods for memory card error code 1010. Simply put, this is a full guide on memory card error 1010. If you are suffering from this issue, apply the given methods in this post to solve it.

If you have other methods to fix the issue, you can share them with us in the following comment area. For any issues with MiniTool Partition Wizard, please contact us by sending an email to [email protected]. We will get back to you as soon as possible.

  • linkedin
  • reddit