IP Address 192.168.0.100 – Network Router Admin Login

IP Address 192.168.0.100

192.168.0.100 is a private IP address that is commonly applied in some private situations, such as schools, families, or corporations. It has higher security level and privacy.

The IP address 192.168.0.100 is popular among multiple broadband router models and access points, such as Netgear router, SerComm, and USRobotics printers.

192.168.0.100 has been preconfigured so that no other Internet can access it but any device on a local network can connect to another device on that network.

For some users, you may want to change your password or any other settings, in this way, 192.168.0.100 admin login is required. To log in to 192.168.0.100, there are some preconditions you need to pay attention to.

Make sure the network you are connected with belongs to the 192.168.5.1 IP address. Usually, the label on the back of your router packaging will show you the IP address; or you can follow this article to find your IP address: What Is My IP Address and Location? Check Your IP Address.

Then you can go to the next part to follow to log in to 192.168.0.100.

Related articles:

• 168.3.1 – How to Log in to the IP? Username & Password
• Default Login Admin – 192.168.5.1 – Username & Password
• Router Admin Login – 192.168.1.3 IP Address for Local Network

192.168.0.100 Admin Login

To finish 192.168.0.100 admin login, you can do as follows.

Step 1: Open your browser like Chrome, Safari, Edge, etc. and input 192.168.0.100, http://192.168.0.100, or https://19.168.0.100 into the address bar on the top of the window to enter.

Step 2: After that, the browser will jump to the router login page and you will be asked to input your username and password. If you have forgotten your password, you can the following popular default logins.

Username: admin, Password: password

Username: admin, Password: admin

Username: admin, Password: 1234

Username: admin, Password: –

Username: -, Password: admin

Step 3: Then click OK or Login to enter and you can configure the settings.

If those password and username can’t qualify, you can reset the password for 192.168.0.100.

To reset the router, you can keep your router plugged in and hold down the reset button on the back or the bottom of your router with a pin for 30 seconds. Then please release the button and wait for the router to power back on.

192.168.0.100 Login Issues

If you fail to log in to 192.168.0.100, you can do as follows.

1. Make sure the input contents in the browser are spelled correctly.
2. Check if your Internet is the right one connected to your router device.
3. Try other browsers or clear the browser cache and cookies.

Related article: How to Clear Cookies on Chrome, Firefox and Edge

MiniTool ShadowMaker TrialClick to Download100%Clean & Safe

Bottom Line:

To log in to this IP address – 192.168.0.100, this article has given you a full introduction and step-by-step guide, if you have any question about that, you can leave your message below.