To figure out what the IP address 192.168.1.3 is, you can read this article related to 192.168.1.3 on MiniTool Website. In that, all information about 192.168.1.3 will be disclosed, including the login method and the troubleshooting method for the related issues. If you are interested, please continue reading.

192.168.1.3 IP Address

Just similar to other IP addresses, only if you have a router to help connect to the Internet, you will need to run a basic Wi-Fi network and 192.168.1.3 is the local IP address of your router that is used in an internal network. Your router also has a public IP address that is used to communicate outside the network.

In general, IP addresses are able to send and receive traffic and allow information to be sent between devices on a network. Therefore, some cybercriminals can use your IP address to track down your ISP and perform a phishing attack to expose your privacy.

Related article: How to Track an IP Address on A Windows Computer?

As usual, your router password and other settings have been automatically configured but you may want to optimize the network settings. To change it, you need to log in to 192.168.1.3 – your router IP address first.

The method for the 192.168.1.3 login admin is not much difficult and the next part will present specific steps.

192.168.1.3 Login Admin

Before you start the 192.168.1.3 login admin, you need to check if you have connected to the router with the IP address 192.168.1.3 via Wi-Fi or with a wired Ethernet connection. It is a precondition performed so that the next moves will go well and smoothly.

Step 1: Open your browser on the computer after the connection and type 192.168.1.3 in your web browser’s address bar and press the Enter key.

Step 2: Then a page will pop up to ask for your username and password. Please enter the correct type. If you forgot your username and password, please see your router's instructions or label; or try admin in both vacuums because most router brands will make it as their username and password but some are not.

After that, you can successfully enter the 192.168.1.3 login admin and you can change your network settings.

To configure your router, you need to find your general settings menu and then network settings to do your changes.

Reset the Password for 192.168.1.3

If your username and password remain incorrect, you can choose to reset the modem to factory settings by the following steps.

Step 1: Keep your router plugged in and find your router’s reset button on the back or the bottom of your router.

Step 2: Hold down the reset button with a pin for 30 seconds and then release the button.

Step 3: Wait for the router to power back on.

Note: Resetting your router or modem will erase all your custom settings.

192.168.1.3 Login Issues

Some people may encounter 192.168.1.3 login issues, to troubleshoot that, you need to check if your IP address is 192.168.1.3 and make sure the input contents in the browser are spelled correctly. Just don’t mistake the number 1 for the I.

What Is My IP Address and Location? Check Your IP Address
What Is My IP Address and Location? Check Your IP Address

What is my IP address? This post teaches you how to quickly find out your IP address and location.

Read More

Bottom Line:

This article has given you a guide to logging in to the IP address 192.168.1.3. If you have other issues, you can leave your comment messages.

  • Linkedin
  • Reddit