Adata Releases the Newest IUSP33F PCle BGA SSD

Adata Launches the Latest IUSP33F PCle BGA SSD

With the rapid improvement of 3D flash package technology, the size of solid-state drive becomes smaller and smaller. Therefore, Adata Corporation also releases a kind of new SSD, which is called Adata IUSP33F PCle BGA SSD. And it is also in small size. And we will introduce the form of Adata IUSP33F PCle BGA SSD in detail in the following part.

Compared with the traditional M.2 2242 SSD, the volume of Adata IUSP33F PCle BGA SSD has been reduced about 80%. With the small size, Adata IUSP33F PCle BGA SSD can be used in some embedded storage devices with the limited space, such as notebook computers, tablets, VRs, Mini-PCs and so on. And Adata IUSP33F PCle BGA SSD also takes advantage of a PCle Gen3x2 interface and 3D flash memory, so it has good performance and durability. What’s more, the Adata IUSP33F PCle BGA SSD will be largely produced in the September 2018.

Now, in the following part, we will introduce Adata IUSP33F PCle SSD in detail. You can go on your reading. The latest launched Adata IUSP33F PCle BGA SSD is pretty small. It is only 11.5x13mm. The controller and NAND flash are packaged together through the BGA package technology, making its size as small as the eMMC. And the power consumption of Adata IUSP33F PCle BGA SSD is lower. However, it has better read and write performance.

Adata IUSP33F PCle BGA SSD has the double advantages of high efficiency and lower power consumption. It takes advantage of PCle Gen3x2 interface and it conforms to the standard of NVMe 1.3, so its sequential read and write speed can reach up to 1195MB one second and 940MB respectively. In addition, its random read and write IOPS is 140000 and 114000 respectively. The read and write transmission speed of Adata IUSP33F PCle BGA SSD surpasses the common eMMC and SATA SSD.

What’s more, it also supports the Host Memory Buffer feature to maintain high performance without the integrated DRAM by using host memory for flash memory management purpose. At the same time, the Adata IUSP33F PCle BGA SSD can reduce the lower consumption. In addition, with the 3D flash memory, the storage density of Adata IUSP33F PCle BGA SSD is high, thus providing 128GB and 256GB. IUSP33F SSD can effectively protect the correctness of data transmission and maintain system stability with LDPC ECC、SRAM ECC and E2E Data Protection.

The Adata IUSP33F PCle BGA SSD has undergone rigorous screening and testing to verify its compatibility and stability. All of those rigorous testings are used to test the quality of Adata IUSP33F PCle BGA SSD so as to provide good products to customers.

Thus, with many advantages of Adata IUSP33F PCle BGA SSD, I believe many computer users would choose it to have a try. And if you want to clone the data on the original solid state drive to the Adata IUSP33F SSD, you can try to clone the whole disk. At the same time, MiniTool ShadowMaker can help you to complete that and will not bring any damage to the original data.

Bottom Line

From this news, we can know that Adata launches the IUSP33F PCle SSD. And the IUSP33F SSD has good read and write performance, but it consumes lower power. It also has good stability. And if you want to clone a disk, MiniTool ShadowMaker can be a good assistant.