Some people use an Arris router but don’t know how to log in to the Arris router. To log in to Arris router, this article on MiniTool Website will give you a guide and teach you the method to reset and configure Arris router. If you are interested, please read this post.

Arris Router Login

It is easy to log in to your Arris routers. There are two default logins for Arris. The most commonly used IP address is 192.168.0.1 and most of these router usernames are admin and the passwords are password; some of them don’t have their username.

Some other top Arris IP addresses are 192.168.100.1, 192.168.7.254, 192.168.1.254, and 10.0.0.1.

192.168.1.2 – Login Admin – How to Log in to the IP Address
192.168.1.2 – Login Admin – How to Log in to the IP Address

The method to log in to 192.168.1.2 is easy to go. If you are curious about this IP address, this article will give you some detailed information.

Read More

Log in to Arris Router

To finish Arris router login, you can follow these steps. Before you do that, please make sure you are using an Arris router or modem and have Ethernet connection or Wi-Fi connectivity.

Step 1: Open your browser and enter the IP 192.168.0.1 into your browser and press Enter. If your router is not Arris, the search will fail.

Step 2: Then enter your router username which could be Admin or none and enter your router password which could be password or none.

Step 3: Once you enter the correct credentials, click the Enter or Sign In button.

If you can’t find the correct username and password, you can reset the Arris router.

192.168.1.0 Default Router IP Login – Explanation and Method
192.168.1.0 Default Router IP Login – Explanation and Method

What is the 192.168.1.0 default router IP address? And how to log in to the 192.168.1.0 IP address? This post will give you a detailed introduction and guide.

Read More

Reset Arris Routers

To reset Arris routers, you can follow the steps.

Step 1: Find the Reset button on the back of your router and press and hold the Reset button for 15 seconds with a pin.

Step 2: Wait for the router to fully reset and power back on.

Then you can configure your router and update your Wi-Fi devices to use the same customized Wi-Fi settings and log in to your router to restore factory settings.

Change Arris Wi-Fi Network Name (SSID) and Password

After finishing the Arris modem login, you can change the Arris Wi-Fi network name and password. The specific steps are as follows.

Still, make sure you are using an Arris router or modem and have an Ethernet connection or Wi-Fi connectivity.

Step 1: Open a browser and type 192.168.0.1 in the address bar to enter.

Step 2: Enter the right Default Username and Password to log in. if you forget them, please reset your Arris router.

Step 3: In Wireless Settings, go to the Basic Setup tab.

Step 4: Under the Wireless 2.4 GHz section, enter the new Wi-Fi name in the column next to the Wireless Network Name (SSID) field.

Step 5: Enter your new Wi-Fi password in the column next to the Pre-Shared Key field under Wireless 2.4 GHz.

Step 6: Click on Apply to save settings.

Arris Router Login Issue

If the above methods can’t resolve your login issue, there are some requirements you need to check.

  1. If your router or modem belongs to Arris.
  2. If your network has been connected right. Please make a stable network connection.
  3. If your IP address has been input right. Check the IP 192.168.0.1 and don’t mistake the 1 for the I.

Bottom Line:

To log in to Arris routers, this article will be useful. You can follow this post to reset Arris routers, and change Arris network name and password. Hope your issues have been resolved.

  • Linkedin
  • Reddit