Meet the DNS_PROBE_FINISHED_BAD_CONFIG error on Windows 10? Do you know how to get rid of it? If you don’t know, then this post from MiniTool will tell you the answer. You can get several methods in this post.

It is common to meet the DNS_PROBE_FINISHED_BAD_CONFIG (DNS PROBE FINISHED BAD CONFIG) error, and this error can appear on different versions of Windows. When the error occurs, you cannot access any website in a web browser.

So how to fix the DNS_PROBE_FINISHED_BAD_CONFIG error on Windows 10? Keep reading to find the solutions.

Method 1: Restart the Router

The first and easiest method you should take to fix the DNS_PROBE_FINISHED_BAD_CONFIG error is to restart the router. Follow the steps below to do that:

Step 1: Just press the power button on your router to turn it off and wait for a minute. Then power the router on.

Step 2: Restart your computer. Then let your computer connect to your network either using Wi-Fi or LAN cable.

Then this error should be fixed. But if the error keeps appearing, then try the next methods.

Meet Windows 10 WiFi Problems? Here Are Ways to Solve Them
Meet Windows 10 WiFi Problems? Here Are Ways to Solve Them

If you meet Windows 10 WiFi problems when you are using your computer, then you should read this article to find efficient solutions to resolve them.

Read More

Method 2: Flush DNS and Renew the IP Address

If the error still appears, then you should flush DNS and renew the IP address. Here is the tutorial:

Step 1: Press the Win + R keys at the same time to open the Run dialogue box.

Step 2: Type cmd in the box and then press the Ctrl + Shift + Enter keys at the same time to open Command Prompt as administrator.

Step 3: Then type the following commands separately in the window and press Enter after each command.

ipconfig /flushdns
ipconfig /renew
ipconfig /release
ipconfig /all

flush DNS and renew the IP address

Step 4: Restart your computer and then try to access some websites to check if the DNS_PROBE_FINISHED_BAD_CONFIG error is fixed.

Method 3: Clear the Browser Cache

The culprit of the DNS_PROBE_FINISHED_BAD_CONFIG error may be your browser’s corrupted cookies and cache. Therefore, you should clear your browser cache. It is very easy to do this whether you are using Chrome or other browsers.

Follow these general settings that apply to all common browsers:

Step 1: Open your browser and then go to Settings.

Step 2: Look for the option named such as browsing data, history or something similar.

Step 3: Check all the data that you want to clear and then click Clear or Clear data.

After you have cleared the browser cache, the error should be fixed.

Method 4: Change DNS Address

If none of the methods above can help you to fix the DNS_PROBE_FINISHED_BAD_CONFIG error, then you can try to change the DNS address of your network adapter.

Follow the steps below to do that:

Step 1: Type control panel in the Search box and then click Control Panel.

Step 2: Set the View by Large icons and then click Network and Sharing Center.

Step 3: Click Change adapter settings in the left panel. Then right-click your Network Connection to choose Properties.

Step 4: Click Internet Protocol Version 4 (TCP/IPv4) and click Properties.

change DNS address

Step 5: Change the Preferred DNS server to 8.8.8.8 and then change the Alternate DNS server to 8.8.4.4. Click OK to save changes.

Now you can try to access some websites to check if the error is gone.

Fixed: Server DNS Address Could Not Be Found Google Chrome
Fixed: Server DNS Address Could Not Be Found Google Chrome

Meet server DNS address could not be found in Google Chrome? 4 solutions to fix DNS address could not be found error on Google Chrome.

Read More

Bottom Line

To sum up, you can find four useful methods to fix the DNS_PROBE_FINISHED_BAD_CONFIG Windows 10 error. So if you encounter the error, try the methods mentioned above.

  • Linkedin
  • Reddit