How to Fix PS4 Controller Drift? Here Are the Solutions!

Reasons for PS4 Controller Drift

If your character or camera keeps moving when you are not touching the controller, the source of the problem may be analog stick drift. PS4 controller drift may be due to one of the following two reasons: the analog stick is dirty and the analog joystick or potentiometer is damaged.

PS4 Controller Repair: Fix Common DualShock 4 Controller Issues

The PS4 controller repair is necessary and needs to be finished quickly when problems occur (PS4 controller not working/connecting/charging/pairing/syncing).

Read More

How to Fix PS4 Controller Drift

How to fix controller drift PS4? This part provides answers for you.

Solution 1: Reset Your PS4 Controller

How to fix stick drift PS4? You can reset your PS4 controller. Here is how to do that:

1. log in to your working PS4 controller and navigate to the Settings.
2. Then choose Devicefrom the drop-down menu.
3. Next, select Bluetooth Devices.
4. Then you can see that all your PS4 controllers are listed here. Choose the abnormal one.
5. Then press the Optionsbutton on your controller, at the front of the touchpad.
6. In the pop-up window, choose Forget device.
7. After that, you have forgotten the malfunctioning PS4 controller. Then you can choose to turn off PS4.
8. Use a USB cable to connect the inactive PS4 controller to your PC.
9. Then turn on it and wait for it to boot up.
10. Then log in to it.

How to Reset PS4 Controller? Soft and Hard Reset

Do you know how to reset PS4 controller? How to calibrate a PS4 controller? This post shows you the answer.

Read More

Solution 2: Clean Your PS4 Controller

How to fix PS4 controller drift? Use a dry microfiber cloth to gently wipe the gap of the analog rocker. To remove dirt, use a cotton swab dipped in a mixture of water and isopropyl alcohol. If you see unreachable dirt, you can use compressed air to remove it.

Solution 3: Contact Sony

If your controller is relatively new, it may still be under warranty. Go to the PlayStation Repair and Replacement page, select DualShock 4, and follow the prompts to see if you are eligible for free repair or replacement.

Solution 4: Disassemble the PS4 controller to Clean the Analog Stick

To perform a deep cleaning of the controller input, you must remove the casing and lift the battery to access the motherboard. Use a cotton swab and a mixture of water and isopropyl alcohol. Do not use pressurized air on internal components.

Solution 5: Replace the PS4 Analog Stick

If you want, you can try to replace the analog joystick and potentiometer (the sensor of the analog joystick). In addition to the parts that can be purchased online, you will also need a soldering iron. Unless you want to do it yourself, buying a new controller is a cheaper and simpler solution.

Final Words

How to fix PS4 controller drift? This post has introduced 6 ways to fix the issue. If you come across the same issue, try these solutions. If you have any better ideas to fix this error, you can share it in the comment zone.