It is very annoying when you try to access the Internet but get an error message saying that “Local Area Connection doesn't have a valid IP configuration”, then do you know how to fix it? If you have no idea, then this post from MiniTool is what you need. You can find 3 useful methods to get rid of the issue.

If you failed to access the Internet, then you may see the following messages:

This post focuses on the last issue and gathers several efficient solutions. Now follow the guide below to deal with the problem.

Method 1: Change the Value of Your Network Connection

Local Area connection does not have a valid IP configuration? Don’t worry. You can try to change the value of your network connection to solve the problem. Now follow the instructions below to do that:

Step 1: Press the Win + I keys at the same time to open Settings. Choose Network & Internet.

Step 2: Go to the Status tab and then click Change adapter options in the right panel.

click Change adapter options

Step 3: Right-click the network adapter that you are using to choose Properties.

Step 4: Click Configure… and then go to the Advanced tab. Choose Network Address under the Property section and then change its value to random 12 alphanumeric characters. Here we take 20GF23FE8630 as an example, and then click OK to save changes.

choose Network Address

Step 5: Restart your computer to check if you can connect to the Internet.

Limited Network Connectivity Windows 10? Fixed with 6 Tips
Limited Network Connectivity Windows 10? Fixed with 6 Tips

Windows 10 shows limited network connectivity error? How to fix it? Check the 6 tips in this tutorial to fix limited Internet connectivity problem Windows 10.

Read More

Method 2: Reinstall Your Network Adapter Driver

If your network adapter driver is outdated or corrupted, then you can receive the error message - Local Area Connection doesn't have a valid IP configuration. In this case, you can try to reinstall your network adapter driver to fix the error. Here is a quick guide on how to do that:

Step 1: Press the Win + X keys at the same time to choose Device Manager.

Step 2: Expand Network adapters and right-click the adapter that you are using to choose Uninstall device.

reinstall network adapter driver

Step 3: Click Uninstall to confirm the uninstallation. And if available, check Delete driver software for this device and click OK.

Step 4: Restart your computer, and the system will automatically install the default network driver. Then check if the error is fixed.

Method 3: Change Network Adapter Settings

The last method you can try to fix “Local Area Connection doesn't have a valid IP configuration” is to change network adapter settings. Now follow the steps below to do that:

Step 1: Press the Win + R keys at the same time to open the Run box.

Step 2: Type ncpa.cpl in the box and then click OK to open Network Connections.

Step 3: Locate your network connection, right-click it to choose Properties.

Step 4: In the Properties window, choose Internet Protocol Version 4 (TCP/IPv4) and then click Properties.

Step 5: Choose Obtain an IP address automatically and Obtain DNS server address automatically. Click OK to save changes.

choose Obtain an IP address automatically

Now you can restart your computer to check if the error appears again. If the error still persists, then follow the guide below:

  1. In the Internet Protocol Version 4 (TCP/IPv4) Properties window, choose Use the following IP address, then enter the IP address, Subnet mask, Default gateway.
  2. Then choose Use the following DNS server addresses, enter Preferred DNS server and Alternate DNS server. Click OK to save changes and then check if the error is fixed.

choose Use the following IP address

The End

This post is mainly talking about how to fix Local Area Connection doesn't have a valid IP configuration, so if you meet the error, don’t hesitate to try these methods mentioned in this post.

  • Linkedin
  • Reddit