Because of some Internet issues, Roku errors can easily occur when you are attempting to start with your Roku devices and Roku error 014.30 is one of them. To fix the Roku error 014.30, you can refer to this article on MiniTool Website and some easy methods will be listed here.

What Is Roku Error 014.30?

Roku error 014.30 is often accompanied by the message box with the information that tells you the “can’t connect to your wireless network” issue. The error often means your Internet connection is poor or no Internet is available.

Apart from the Internet issues, you can doubt if some misconfigured device settings make the Roku Internet issue 014.30.

Related article: [4 Ways] How to Connect Roku to WiFi Without Remote?

How to Resolve Roku Error 014.30?

Fix 1: Check Your Internet Connection

Because the root of this Roku error 014.30 lies in the Internet issue, the first and foremost task is to check if your Internet runs well. You can try your other devices to see if they are well-performed or get closer to the Wi-Fi sources with your devices.

if you find your Internet connection is intermittently performed, you can restart your modem and router by following the next moves.

Step 1: Unplug all hardware from your router and modem.

Step 2: Wait at least 30 seconds to cool down your device.

Step 3: Re-plug in your modem and you can press the Power button if it doesn’t power on.

Step 4: Wait about 60 seconds and then re-plug in your router. Some routers may require that you press a Power button.

Step 5: Wait about 2 minutes to allow the router to boot up.

Then check if your Internet goes back to normal.

Fix 2: Check Your Network Password

If you find your network works well, you can check if your network password is entered right.

Step 1: Use your Roku remote to press the Home button to open the main screen and then choose Settings.

Step 2: Then choose Network and go to Setup connection to choose Wireless.

Step 3: Choose the network you are using and check if the password is input correctly.

Fix 3: Power-Cycle Devices

You can power-cycle your router and TV to fix the buildup of corrupt DNS cache inside the router.

Step 1: Unplug all the plugs from the TV.

Step 2: Press and hold the Power button on the TV for at least 20 seconds to discharge the stored electricity.

Step 3: Re-plug your devices and turn them on.

Then you can check if the Roku error 014.30 has been resolved.

Fix 4: System Restart Your Roku

You can choose to system restart your Roku to see if the issue can be resolved.

Step 1: Go to Settings on Roku.

Step 2: In System, choose System restart.

After a while, you can check if the Roku Internet issue has been resolved.

Fix 4: Perform Factory Reset

This method will destroy all the data left in your Roku so if the above methods are useless for you, a factory reset might be the last resort.

Step 1: Go to Settings on your Roku device and choose System.

Step 2: Choose Advanced system settings from the list and then the Factory Reset option.

Step 3: You need to choose Factory reset everything and enter the code shown on the screen and choose OK.

Then the reset will start and once the process finishes, you can turn on your TV and reconnect the network. Check if the error code 014.30 on Roku persists.

Related article: Why Is My Roku TV So Slow? How To Make It Faster?

Bottom Line:

Roku error 014.30 is recoverable and you can easily resolve it with simple steps. Hope this article can be useful for you.

  • linkedin
  • reddit