What is How to log in to MiniTool will show you some basic information about and other details on admin login, change password & issue troubleshooting. Keep on your reading.

What Is is your router’s default gateway. You can use this internal IP address to securely access the router’s admin panel and make changes to your home Wi-Fi, including changing the Wi-Fi network name, changing the Wi-Fi password, keeping a static IP address, and more. Netgear, D-link, TP-Link, ASUS, Cisco, Linksys, Tenda, Huawei, and Dell use as the default router IP address.

Related Posts:

How to Log in

How to log in to Follow the guide below:

Step 1: Open a web browser and enter or into the URL bar.

Step 2: Enter your username “admin” and password “admin” on the login page.

Step 3: You will now be logged into your router’s Admin Panel. Username & Password

This list will show you the most used default usernames and passwords for the device IP

Frequently used default logins for are listed as follows. You can take them as a reference while logging into the IP.


Username: admin

Password: admin


Username: admin

Password: password


Username: n/a

Password: admin


Username: (blank)

Password: admin


Username: (blank)

Password: admin

How to Configure the Router with

Change Password

You can change the password as you like. Here are the steps:

  1. Go to the Settings menu.
  2. Choose the router password option.
  3. Enter your desired password
  4. Save the changes.

Change SSID

The SSID, or service set identifier, is the name that distinguishes your router’s Wi-Fi network from other nearby networks.

  1. Go to the Setup menu.
  2. Click the wireless settings option.
  3. Type your desired network name into the SSID field
  4. Save the changes.

Change the Local IP Address

If you do change your router’s local IP address, you will not be able to access the router with, so you should ensure to remember your new address. To change the address:

  1. Go to the Setup menu.
  2. Click the network settings option.
  3. Under the router settings, type your desired IP address.
  4. Save the changes.

How to Troubleshoot Connection Issues?

There are many situations where IP addresses may no longer redirect you to the admin panel. These issues may include:

  • IP refused connection
  • Router or IP not working
  • The server is not responding fast enough

How to troubleshoot connection issues?

1. Check the IP address

Make sure your internet protocol is correct. Errors such as changing “1” to “I” will be incorrect and you will not be able to access it.

2. Check the Username or Password

For security reasons, network administrators can usually change the default password and username.

3. Make Sure You Have Connected to Your Home WiFi

You must be connected to your home WiFi router. You can’t access it outside your home network. Try restarting the router and try again on

4. Reset the Router

Press and hold the reset button on the back of the router for 20 seconds to reset the router. Your router should reset itself and restart.

  • linkedin
  • reddit