Do you know how to solve the problem that display driver nvlddmkm stopped responding and has successfully recovered? If you don’t know, then this post from the MiniTool website will tell you several useful methods to get rid of it.

It is very common to meet the problem that display driver nvlddmkm stopped responding and has successfully recovered, and this error occurs when your graphics hardware is being used. But luckily, there are several feasible methods in this post that you can use to solve the problem.

Solution 1: Check Power Supply

If your graphics hardware isn’t getting enough power through the hardware, then the issue that display driver nvlddmkm stopped responding could appear. Therefore, you should check the power supply.

Step 1: Type control panel in the Search bar and then click Control Panel.

Tip: If you find that the Search bar is missing, then you should read this post - Windows 10 Search Bar Missing? Here Are 6 Solutions.

Step 2: Set View by: Large icons and then click Power Options.

Step 3: Click Change plan settings next to your preferred plans and then click Change advanced power settings.

Step 4: Expand PCI Express and then expand Link State Power Management. Then click Moderate power settings to make sure the Settings is set to Off. Click OK to save changes.

check power supply

Step 5: Restart your computer to check if the problem is solved.

Solution 2: Make Changes to Your Graphics Drivers

If your graphics driver is corrupted or outdated, then the problem will appear. Thus, you should make changes to your graphics driver. Here is the tutorial:

Step 1: Boot your computer in Safe Mode, then press the Win + X keys to choose Device Manager.

Step 2: Expand Display adapters and then right-click your graphics driver to choose Uninstall device. Check Delete the driver software for this device and then click Uninstall.

uninstall your graphics driver

Step 3: Reboot your computer, the system will automatically reinstall your graphics driver. Then check whether this problem has been solved.

Step 4: If the issue still appears, then open Device Manager again to expand Display adapters.

Step 5: Right-click your graphics driver to choose Update driver and then choose Search automatically for updated driver software. Follow the instructions showing on the screen to update your graphics driver.

click Search automatically for updated driver software

Step 6: Restart your computer to check if the problem is gone.

Solution 3: Edit Registry Editor

If none of the solutions have fixed the error that display driver nvlddmkm stopped responding and has successfully recovered, then you can edit Registry Editor to fix it. Here is a quick guide:

Step 1: Press the Win + R keys at the same time to open the Run box.

Step 2: Type regedit in the box and then click OK to open Registry Editor.

Step 3: Navigate to the following path:

HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\GraphicsDrivers

Step 4: Right-click on any empty space on the right side of the screen and select New > DWORD (32-bit) Value. Name it as TdrDelay and press Enter.

create DWORD (32-bit) Value

Note: If your operating system is 64-bit, then you should select QWORD (64-bit) Value. And if you don’t know whether your computer is 32-bit or 64-bit, then you should read this post - Is My Computer 64 Bit or 32 Bit? Try the 5 Ways to Judge out.

Step 5: Double-click TdrDelay and then change the Value data to 20. Click OK to save changes.

Step 6: Repeat Step 5 and 6 to create a new DWORD named TdrDdiDelay and change the Value data to 20. Click OK to save changes.

change Value data

Step 7: Restart your computer to check if the problem still exists.

Bottom Line

To sum up, if you meet the issue that display driver nvlddmkm stopped responding and has successfully recovered, then you should refer to the solutions mentioned above to get rid of it.

  • Linkedin
  • Reddit