What will you do when you try to use a hardware device but receive the error 29 code in Device Manager? If you don’t know, then it is recommended to read this post. In this post, you can find several methods to deal with error 29. If you want to fix other error codes showing in Device Manager, you can go to the MiniTool website.

When trying to use a hardware device but find that it cannot be used, then you go to the Device Manager to check device status and got the error message stating “This device is disabled because the firmware of the device did not give it the required resources. (Code 29)”

Why does this error appear? There are several possible causes listed below:

  • Outdated or corrupted drivers.
  • BIOS misconfiguration
  • Corrupted device firmware.

Then how to fix error 29 in Device Manager? Read the following text carefully.

Related post: How to Fix Error Code 41 in Device Manager in Windows?

Solution 1: Reboot Your PC

Every time you meet problems on your computer, you should try to reboot your computer and then you may find that the problem is gone. This is because the problem may be caused by some temporary issues with hardware.

Therefore, before you try some methods to get rid of error 29 in Device Manager, you should reboot your computer. Just click on the Start button, choose the Power option, and select Restart from the menu.

However, if the error 29 still appears in Device Manager, then you should try the following solutions.

Related post: [Solved] This Device Is Disabled. (Code 22) in Device Manager

Solution 2: Update the Driver

As we mentioned above, the outdated or damaged driver could be the culprit of error code 29. Thus, it is helpful to update the device driver that triggers error 29. Follow the guide below to do that:

Step 1: Find and download the latest drivers for the hardware from the hardware manufacturer’s website.

Step 2: Press the Win + X keys at the same time to choose Device Manager.

Step 3: Find the target device, and right-click on it to choose Update driver.

Step 4: Choose Browse my computer for driver software.

Step 5: Click Let me pick from a list of available drivers on my computer and then click Next.

Step 6: Choose the device driver that you want to install for the hardware and then click Next.

Step 7: Wait for the process to complete and then restart your computer to check if the error 29 appears again.

Related post: Error Code 21 In Device Manager – How To Fix It

Solution 3: Reset the CMOS

Incorrect BIOS configuration may be the reason that the hardware is disabled or unable to provide resources. Resetting the CMOS on the motherboard will restore the BIOS to the default factory settings.

If you want to get detailed instructions, read this post - How to Reset BIOS/CMOS in Windows 10 - 3 Steps.

Solution 4: Enable the Device in the BIOS

If none of the methods can get rid of the error 29, then you should try to enable the device in the BIOS. This is because some card or motherboard features may have physical jumpers or DIP switches, which must be enabled to work properly.

To do that, enter BIOS and then enable the device in the Advanced tab.

Bottom Line

To sum up, this post has offered you 4 solutions to deal with error 29 in Device Manager. So if you meet error 29, you can try the methods mentioned in this post to fix it.

  • Linkedin
  • Reddit