You may encounter the pop-up error each time your PC reboots and you don't know what to do. The box says something about msftconnecttest redirect or application not found. This post from MiniTool will show you several solutions.
Msftconnecttest Redirect
Msftconnecttest redirect is a problem that occurs on devices supported by the Windows operating system. Many online reports state that users cannot connect to the Internet due to redirection errors on the screen. In most cases, even if some action is taken, the error will get stuck in a loop and prevent users from accessing the Internet.
The following are two main reasons can account for the “msftconnecttest” issue.
Connection issues
Each time the application connects to the internet via the Windows operating system, the connection test is indicated to choose the best network. This test can fail and prevent the connection from being established.
HTTP/HTTPS configuration
The default application for the HTTP or HTTPS protocol might not be selected, so the error occurs. The default browser needs to be selected for these specific protocols.
How to Fix the “Msftconnecttest” Error
Solution 1: Disable Connection Test
This error may be triggered if the computer is configured to perform a connection test every time an application attempts to establish a connection. Thus, in this step, you should disable the connection test entirely. Here is how to do that:
Step 1: Press the Windows + R keys at the same time to open the Run box. Then, type regedit and press the Enter key to open Registry Editor.
Step 2: Navigate to the following path:
HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Services\NlaSvc\Parameters\Internet
Step 3: In the right pane, double-click the EnableActiveProbing entry.
Step 4: In the Value data field, enter 0 in the box and click the OK button.
Then close the registry and check to see if the “msftconnecttest“ issue persists.
Solution 2: Change HTTP/HTTPs Configuration
In some cases, the error is triggered if the default browser hasn’t been selected for the HTTP/HTTPS protocol. Therefore, in this step, you should try to change HTTP/HTTPs configuration. In order to do that:
Step 1: Press the Windows + I keys simultaneously to open the Settings application.
Step 2: Click the Apps option and select Default apps from the left pane.
Step 3: Click the Choose default apps by protocol option.
Step 4: Scroll down and click the Select a Default option.
Step 5: Click the Select a Default browser option for HTTPS and select the browser from the list.
Close the window and restart your PC. Then check to see if the issue persists after restarting.
Solution 3: Reset the Internet Explorer settings
You can also reset the Internet Explorer settings with the following steps to fix the “msftconnecttest” issue.
Step 1: Go to Control Panel > Network and Internet > Internet Options.
Step 2: Click the Advanced tab.
Step 3: In the Reset Internet Explorer settings section, click Reset….
Step 4: Select Reset in the pop-up window to confirm the operation.
Once it’s done, restart your computer and check if the solution works.
Final Words
It’s time to make a conclusion. From this post, you can know the reasons for the “msftconnecttest ipdiags” issue. In addition, here are 3 useful methods for you fixing the annoying issue.