T-FORCE Vulcan SSD, T-FORCE T1 gaming memory, and T-FORCE Vulcan Z gaming memory are three new gaming products from Team Group. There is some information about them.

3 New T-FORCE Gaming Series Products Were Released

Last week, Team Group announced there new products of T-FORCE gaming series, including T1 and Vulcan Z gaming memory, and the Vulcan SSD.

The T1 memory line is designed for a more entry-level gamer with lower peak speeds and capacities; the Vulcan Z stick has higher speed and larger capacity, and it is designed with compatibility and stability in mind; the Vulcan SSD focuses on the styling of the aluminum chassis with the typical SATA3 6Gbps-limited speeds.

T-Force Announces the Delta R RGB SSD with Different Capacities
T-Force Announces the Delta R RGB SSD with Different Capacities

T-Force corporation has released the new Delta R RGB SSD, which has three different capacities. And in this post, you can get more detailed information.

Read More

T-FORCE Vulcan SSD

The T-FORCE Vulcan SSD is a standard and 2.5-inch 7mm form device. It uses the SATA3 (6Gbps) protocol and its capacities include 250GB, 500GB, and 1TB.

It is really thin, and detail focused. The appearance of the drive is stylish with a shiny T-Force logo in the middle of the device.

T-FORCE Vulcan SSD

It is quite suitable for Ultrabooks on the market. No matter you are using a gaming notebook or a high speed gaming desktop computer, after using this SSD, you can do the upgrade fast and effortlessly.

The read and write speed of the drive can reach up to 560 MB/s and 510 MB/s with IOPS hitting 90K/85K for the 1TB model. Till now, we don’t get the detailed information about its controller.

To achieve the high speed, the drive is using the 3D NAND flash and the built-in error correction. The drive also use the wear-leveling technology and ECC to guarantee long service life and security. The drive has a 1,000,000 hour MTBF (Mean Time Before Failure). After you get it, it will have a three-year warranty.

If you want to know more information about this SSD, you can also visit the Team Group official site.

[SOLVED] Solutions to Fix External Hard Drive Keeps Disconnecting
[SOLVED] Solutions to Fix External Hard Drive Keeps Disconnecting

If you are bothered by external hard drive keeps disconnecting, just use MiniTool data recovery tool to rescue data and then take measures to fix this issue.

Read More

The rest 2 new products are gaming memory but not SSD as T-FORCE Vulcan. The details are in the following content.

T-FORCE T1 Gaming Memory

This is a gaming memory line is suitable for the entry-level gamer,a nd it comes with 2400MHz and 2600MHz speeds. The capacity of the drive can reach up to 16GB in either 2x8GB or 4x4GB.

It is very easy to use since the drive is compatible with both AMD and Intel systems. Besides, it support Intel XMP 2.0 profiles. The stick can run at 1.2V so as to save a bit of power and lower the heat output ideally.

This T-FORCE T1 gaming memory uses a special ink and printing process to place the main design features on the PCB directly as opposed to on a heat spreader as you are more familiar with. The company said that the ink can work in high temperature environments.

The device has a heatspreader-free design which allow for more flexibility when you choose air coolers due to the minimal height compared with others using larger heatsinks which can get in the way.

T-FORCE Vulcan Z Gaming Memory

The T-FORCE Vulcan Z gaming memory speed is raised to 2666 MHz to 3200 MHz, and its capacity reaches up to 32GB (2x16GB).

The lineup adds a one-piece, low low profile,  and a 0.8mm thick heat spreader with superconductivity which can keep the memory running cool. Till now, it has two colors as red and grey.

However, if you want to use RGB LEDs, both Vulcan Z and T1 memory don’t have them. You need to see their Xcalibur, Delta, or Night Hawk Legend DDR4 memory kits, and they also have higher speeds and capacities.

Depending on the speeds, this T-FORCE Vulcan Z gaming memory will use 1.2V or 1.35V with CL rating of 16 (2666 MHz) or CL 18 (3000/3200 MHz).

Depending on the speeds, the Vulcan Z kits will use wither 1.2V or 1.35V with CL rating of 16 (2666 MHz) or CL 18 (3000/3200 MHz). The drive is slected by a rigorous testing process and tested for complete compatibility and stability.

  • linkedin
  • reddit