What is 192.168.50.2? How to log into your Wi-Fi admin panel? How to change 192.168.50.2 Wi-Fi password? If you encounter 192.168 50.2 not working, what should you do? MiniTool will show you information about this IP address in this post and let’s look through it to find what you need.
Overview of 192.168.50.2
When it comes to an IP address, you may hear of private IP and public IP. A public IP is an IP address that is accessible over the internet, while a private IP is widely used by various brands of routers as the gateway address. Here is a related post for you to know these two types of IP addresses - Public VS Private IP Address: What Are the Differences.
In terms of private IPs, you may have heard of some common ones like 192.168.1.254, 192.168.0.1, 192.168.1.100, 192.168.1.1, 192.168.2.1, 192.168.0.2, and more. Today, we will show you another private IP – 192.168.50.2.
This IP is used by Linksys routers, Cisco routers, and other network brands to set up the administrator access of the router to configure your network and router. Remember not all routers use 192.168.50.2 as the IP login address (they use other private IPs, as shown above).
192.168.50.2 Admin Login
How to log into the admin panel of 192.168.50.2 for configuring something? It is easy to do this work. See the guide here:
Step 1: Open your browser like Opera, Chrome, Firefox, or Edge on your PC and then visit the path http://192.168.50.2 or copy 192.168.50.2 to the URL bar.
Make sure you type the correct IP address. If you type 192.168 50.2, www 192.168.50.2, or other formats, you cannot enter the login page.
Step 2: Then, you will be redirected to a login screen. Type in the username and password and you will go to the admin panel of the router.
Usually, the login information can be found on the label at the bottom of your router. Usually, the combination of username and password is admin & password or admin & admin.
192.168.50.2 Change Password
In the admin panel after login, you can find many settings related to the router and network. If you want to change the network password, locate the general settings menu and wireless settings option, then change the Wi-Fi network password. Also, you can change the network name in the same menu. The specific steps are different depending on different router brands.
Forget Login Password – 192.168.50.2 Reset Password
If you are unable to log into the admin panel of 192.168.50.2 due to the password reason, you can reset it. To do this work, it is OK to reset the router. Just press a small button that is on the back of the router and hold it for at least 20 seconds. This operation can restore the router to its default settings including the login password.
What is 192.168.50.1? How to log in to it? How to reset it? How to change its password? This post provides all details about 192.168.50.1.
192.168 50.2 Not Working – Login Page Not Opening
192.168.50.2 is the login address for router settings management. If you cannot open the login page, what should you do?
Make sure you type the correct IP address in the URL bar – 192.168.50.2.
If you are using a modem and router, you should know the default IP of the modem provided by the ISP is 192.168.50.2, and the router’s IP is also 192.168.50.2. In this case, an IP address conflict happens and leads to a failing login.
You can disconnect the network cable between the WAN port of the router and the modem, and only connect the PC to the router’s LAN port. Then, log in to the admin panel using the IP address, locate LAN setup or LAN port setup to modify the IP, and connect the router’s WAN port to the modem. Next, use the changed IP for admin login.