The EMTEC flash drive is a commonly used storage device. What if the EMTEC USB flash drive does not work or the files on it are lost? How to recover files from EMTEC USB flash drive and repair it? You can find solutions in this MiniTool post.
In the digital age, USB flash drives, such as EMTEC flash drives, have become an important tool for storing and transferring data. However, data loss issues occur all the time – whether it’s accidental deletion, formatting, virus infection, or hardware failure, which can lead to the inaccessibility of important files.
Many people feel anxious and helpless in the face of such a situation, but in reality, it is quite possible to rescue data from EMTEC flash drive with the right steps. The following part shows you how to recover data from EMTEC storage device, helping you cope with the challenges of data loss with ease.
Can You Recover Files From EMTEC USB Flash Drive
When data on the EMTEC USB drive is lost, you may want to know why it happened to prevent file loss in the future. You might also wonder whether the lost data can be recovered. It is possible to recover files from EMTEC USB flash drive depending on several factors:
1. Reasons for data loss:
- Accidental deletion or formatting: This can usually be recovered, as the data may still exist on the storage media.
- File system corruption: When the file system is damaged, the data that is not overwritten remains on the disk. So, they can be recovered by using data recovery software.
- Physical damage: If the drive is physically damaged, recovery is difficult and may require specialized equipment.
2. Data recovery method:
- Data recovery software: There are many recovery tools on the market and you need to choose one that is suitable for EMTEC USB flash drive recovery.
- Secure data recovery services: If the data cannot be recovered using the recovery tool, it is recommended to contact a professional service, especially in the case of physical damage.
How to Recover Data From EMTEC Storage Device
Using MiniTool Power Data Recovery to recover files from EMTEC USB flash drive is a good option for the following reasons:
- Strong compatibility. MiniTool Power Data Recovery supports a wide range of storage devices, including USB flash drives (such as EMTEC flash drives), hard disks, SSDs, SD cards, and more. It is effective at recovering data regardless of whether the EMTEC flash drive’s file system is FAT32, NTFS, or exFAT.
- Optimized for flash drives. Flash drives, such as EMTEC, typically use NAND flash technology, and MiniTool Power Data Recovery can effectively handle data recovery from this storage medium. It supports recovering data lost due to accidental deletion, formatting, virus attacks, file system corruption, etc. from flash drives.
- Various file types recovery. This comprehensive recovery software supports recovering a wide range of file types, including documents, pictures, videos, audio, compressed files, and more. No matter what type of files are stored in the EMTEC flash drive, the software is capable of recovering them.
The operation is simple and the software interface is friendly, even users without a technical background can easily use it. In addition, MiniTool Power Data Recovery adopts read-only mode, which will not cause further damage to the original data in the EMTEC flash drive. Lost or existing data is not overwritten or modified during the recovery process.
Download and install this free data recovery software that supports recovering 1 GB of files for free to start the EMTEC data recovery.
MiniTool Power Data Recovery FreeClick to Download100%Clean & Safe
Step 1: Connect your EMTEC USB flash drive to your computer.
Step 2: When things get ready, launch the MiniTool Power Data Recovery software. After loading the disk information, the main interface appears in front of you. In the Logical Drives tab, all the partitions, including existing and lost ones, are shown here. Find your EMTEC USB flash drive, move your cursor on it, and click on Scan to scan for data.
Step 3: This process may take some time. When it ends, all files will be generally sorted by file status under the Path tab. You can expand the folders to find the targeted files. Alternatively, there are other functions you can use to find files more quickly.
- Type: The Type tab next to the Path tab classifies the files according to the type such as documents, videos, audio, pictures, and more. You need to double-click on All File Types to expand all the types. Then, find the file you want to recover in the corresponding type.
- Filter: The Filter feature, in the top left corner, allows you to filter files based on the file type, file modified date, file size, and file category. You are expected to click on the Filter button and choose one criterion to filter your wanted files.
- Search: The Search feature is capable of listing the targeted files by filtering out all unnecessary files. All you need to do is type the keywords of the file name in the search box and press Enter.
In order not to waste your 1 GB free recovery capacity, this recovery tool has a Preview function. You can preview the files before saving them to make sure that the recovered files are correct. Select the file and click on the Preview button or just double-click on the file.
Step 4: Once you have confirmed the recovered files, select them all and click on the Save button. Where do you want to store the recovered files? I suggest you choose a new storage location instead of the original one, which can avoid data overwriting. Finally, click on OK to start saving.
What if EMTEC Flash Drive Not Working: Possible Causes
The reasons why EMTEC flash drives not working involve hardware, software, or other factors, and here are some of the common ones.
- Drive can be damaged by dropping, crushing, or exposure to extreme temperatures/humidity.
- The USB port may be damaged due to frequent plugging and unplugging or poor contact.
- A flash drive may have its file system corrupted due to accidental unplugging, virus attacks, or write errors.
- The drive may not have been assigned a drive letter by the system, making it inaccessible.
- Viruses or malware may cause the flash drive to not work properly.
How to Fix EMTEC USB Flash Drive Not Working
If your EMTEC USB is not working, you will not be able to access and use the data in it. How to repair it? Here is a full guide. The following methods are also applicable to repair EMTEC external hard drive.
Fix 1: Reconnect the Flash Drive
The first step is to check the USB connection first. Use another device to test if the USB port is working properly. Clean the USB port to make sure there is no dust or foreign matter. Plug the flash drive into another computer’s USB port.
Fix 2: Check for Physical Damage
Severe impacts, drops, or water ingress of the device may cause damage to the chip or circuitry of the EMTEC flash drive, resulting in unreadable data. Inspect the flash drive casing for visible damage. If physical damage is suspected, it is advisable to contact a professional data recovery service.
Fix 3: Check the Drive Letter
Assigning a drive letter is one of the important steps to fix the USB device not working issue, especially when the device is not recognized by the operating system. By manually assigning a drive letter, you can resolve issues such as drive letter conflicts, file system issues, or partition inactivation. Here are two methods to assign a drive letter.
Via Disk Management:
Step 1: Right-click on the Start button and choose Disk Management.
Step 2: Find your EMTEC USB flash drive and right-click on it to choose Change Drive Letter and Paths.
Step 3: Click on Change, choose a letter from the Assign the following drive letter list, and click on OK.
Via MiniTool Partition Wizard:
MiniTool Partition Wizard is the best partition manager that can meet your disk/partition management needs. The free edition allows you to create/delete/format partitions, change drive letters, check/convert file systems, and so on.
Step 1: Click on the green button to download and install the MiniTool Partition Wizard software.
MiniTool Partition Wizard FreeClick to Download100%Clean & Safe
Step 2: Launch the software, select your USB drive, and click on Change Drive Letter from the left list.
Step 3: Choose a letter and click on OK. Get back to the main interface and click on Apply > Yes.
Fix 4: Update the USB Driver
The old USB driver may have security risks, but the new version can fix these vulnerabilities and improve the operation efficiency and stability of the device. What’s more, if you do a system update, the old driver may not be well compatible with the new system, resulting in the hardware not working properly. Upgrading the driver can solve the problem of the device not working or degraded performance due to version mismatch. Here is how you can do it.
Step 1: Type Device Manager in the Windows search box and press Enter.
Step 2: Click on the small arrow in front of Disk drivers to expand it.
Step 3: Right-click on your EMTEC USB flash drive and choose Update driver.
Step 4: When asked how you would like to search for updates, select Search automatically for drivers.
Step 5: If there is an update available, follow the wizard to complete the installation.
Fix 5: Format the USB Flash Drive
If none of the above solutions solve the problem, then you can try formatting the EMTEC USB flash drive. It can resolve file system corruption, partition table errors, virus infections, and incompatibility issues. Several ways to format the drive are listed here. Work with the following instructions.
Via File Explorer:
Step 1: Press the Win + E keys to open the File Explorer.
Step 2: In the left pane, find and right-click on the EMTEC USB flash drive to choose Format.
Step 3: In the new window, choose file system and allocation unit size, type a new name for the drive, check the Quick Format box, and click on Start.
Step 4: Click on OK in the new prompt box to get started.
Via Disk Management:
Step 1: Open the Disk Management and right-click on the EMTEC USB drive to choose Format.
Step 2: Fill in the corresponding information in the Volume label, File system, and Allocation unit size boxes. And then check the Perform a quick format box and click on OK.
Step 3: In the warning window, click on OK to start formatting.
Via MiniTool Partition Wizard:
Step 1: Launch the MiniTool Partition Wizard software and select the drive you want to format.
Step 2: Under the Partition Management section, click on Format Partition.
Step 3: Type a new name in the Partition Label box, choose a file system and cluster size, and click on OK.
Step 4: After returning to the main interface, click on Apply > Yes to confirm the change.
Bottom Line
Data loss is frustrating, but with MiniTool Power Data Recovery, it is not a difficult task to recover files from EMTEC USB flash drive. Apart from this, when the problem of the EMTEC USB flash drive not working occurs, refer to the solutions above.
MiniTool Power Data Recovery FreeClick to Download100%Clean & Safe
However, prevention is better than cure, and the best strategy to protect your data is to back up your data regularly. Hopefully, the guidance in this article will help you recover your files successfully and better keep your data safe in the future.
If you have any questions or need further assistance with the MiniTool products, don’t hesitate to contact us via [email protected].
About The Author
Position: Columnist
Chelsea graduated from university with a major in English. She has a strong interest in English writing. It is this passion for writing that led her to become an English editor. Her articles mainly focus on data recovery and other computer industry news. As an energetic and outgoing girl, Chelsea enjoys listening to music, singing, riding bikes, and eating in her spare time.
User Comments :